Phased Array Pattern Simulator
You can either generate an array file with the tool here, or upload your own array file. This tool is technically capable of solving 3d array patterns, but be warned that the WWL method I am using currently might not converge correctly.
Additional Info Tidbits
WWL computes a pseudo inverse. If you don't know what that is, all G big dawg, just know that
this requires the matrix you are inverting to be well conditioned. Ideally, you should shoot for under 1, but below 3
is generally fine for this tool.
So what makes an ill-conditioned matrix?
From my experience with using this tool, having the maximum pixel width be smaller than the
array half power beamwidth. What do I mean by this? This is the distance from peak gain to peak gain - 3 dB (half).
Basically, if you imagine each pixel of your image taking up a 3d sector of a sphere that is cut in half and unwrapped
to 2d, make sure that the angle that it takes up is more than the possible half power beamwidth of your array (defined as the following at boresight)
$$HPBW \approx 0.886 \frac{\lambda}{N\cdot D}$$
Where D is the spacing (you should know this by the lambda fraction chosen + frequency chosen for array generation),
And N is the number of elements. Remember that there are two axes to consider, so make sure both satisfy this requirement.
The cat picture I have provided on this page should work with the default array generation settings.
Have fun :)
1. Phased array
input/test_array.csv: a 22 × 53 grid at half-wavelength spacing for 14 GHz.x and y columns in meters, and optionally z (defaults to 0).